When you first get your package, take all stickers out ASAP and lay them out flat for at least 30 minutes prior to application to ensure they will apply well.
☆ Clean and dry the surface area where the sticker is being placed. This is best done with rubbing alcohol or alcohol wipes, if you have neither use soapy water
☆ Ensure the transfer tape is attached to the sticker properly by firmly pressing or squeegeeing the sticker while the transfer tape is still on.
☆ Place the sticker face down and slowly peel back the backing paper making sure that all parts of the sticker are on the transfer tape. This will leave you with only the sticker left on the transfer tape.
☆ Slowly lower the sticker onto your desired surface and anchor the centre of the sticker by pressing down in the middle, then work your way out with a squeegee or card. This will ensure no bubbles are caught under the sticker.
☆ Once the sticker has been firmly rubbed onto the desired surface, slowly peel back the transfer tape at an angle to reveal your sticker.
*Please note that it is best not to apply on really hot or really cold days*
All vinyl has been tested on various different cars and surfaces with amazing success.
Most vinyl I use is rated for up to 5 years outdoors.
Please note: Pressure washing is at your own discretion and risk as it may affect the longevity of your sticker.
Choosing a selection results in a full page refresh.
